Back Panel - Tenda F456 User Manual

Solid
LAN 1/
IPTV Blinking
Off
Solid
WiFi Blinking
Off
Blinking
WPS
Off
Blinking
SYS
Solid/Off
Solid
POWER
Off
Back Panel
POWER: The power adapter is connected and you can use the provided adapter to supply power.
WPS/RST: WPS button/Reset button: Pressing it for about 3 second enables WPS encryption with a
blinking WPS LED while pressing it for about 7 seconds restores the router to its factory default
setting.
WiFi: WiFi button, pressing it disables wireless. WiFi is enabled by default.
LAN/1/2/3: 3 LAN ports (RJ‐45) for connection to PC's NIC or uplink to a hub, switch or wireless AP.
LAN 1/IPTV: IPTV port for connection to a network set‐top box. However, this port can also function
as a LAN port if the IPTV STB option is not enabled.
WAN: Internet port (RJ‐45) for connection to an Internet‐enabled DSL Modem/Cable Modem or
existing Ethernet.
IPTV port is correctly connected
IPTV port is transmitting data
IPTV port is incorrectly connected
WiFi is enabled
Transmitting data
WiFi is disabled
Device is performing WPS authentication on a client device
WPS is disabled or WPS authentication finished
Indicates the system is functioning correctly
Indicates the system is functioning incorrectly
Indicates a proper connection to power supply
Indicates an improper connection to power supply
6
Wireless N450 Home Router