Wolf OG42LP Installation Manual page 15

IN S TA L L AT I O N
Side Burner Installation
E LEC T R I CA L CONN E C T I O N
Depending on the serial number of the grill, there may
1
be one or two connectors near the front of the grill just
above the manifold. Refer to auxiliary harness section
for serial numbers. Locate the connector(s) by looking
above the manifold near the front of the grill.
Remove the unpopulated connector housing(s) from the
2
wire harness(es) coming from the grill as shown in the
illustration below.
Attach the appropriate connector housing(s) from the
3
side burner to the grill. Refer to the illustration below.
If only one connector is found on the grill, refer to the
auxiliary harness section for assembly of the second
connector housing.
UNPOPULATED
CONNECTORS
Connectors Connector housing
|
wolfappliance.com 15