Removing The Presser Foot Holder - Brother CS-8070 Operation Manual

S2_brotherE.book Page 37 Thursday, February 13, 2003 11:03 AM
Removing the presser foot
holder
Remove the presser foot holder when cleaning the
sewing machine or when installing a presser foot that
does not use the presser foot holder, such as the
quilting foot. Use the screwdriver to remove the
presser foot holder.
I Removing the presser foot holder
1 Remove the presser foot.
• For details, refer to " Replacing the presser
foot" (page 35).
2 Use the screwdriver to loosen the presser foot
holder screw.
1 3
1 Screwdriver
2 Presser foot holder
3 Presser foot holder screw
I Attaching the presser foot holder
Align the presser foot holder with the lower-
1
left side of the presser bar.
Hold the presser foot holder in place with
2
your right hand, and then tighten the screw
using the screwdriver in your left hand.
1 Screwdriver
G If the presser foot holder is not correctly
2
Note
installed, the thread tension will be
incorrect.
Replacing the Presser Foot
1
37