Table of Contents
Advertisement
ENGLISH
92
Machine actions
There is a lot of ground coff ee
under the brew group.
The machine grinds coff ee beans
but no coff ee comes out.
(see note)
Coff ee is too weak.
(see note)
Coff ee is brewed slowly.
(see note)
Coff ee leaks out of the coff ee
dispensing spout.
The selector switch is blocked.
The coff ee bean hopper cannot
be inserted.
Coff ee does not taste like the new
coff ee beans.
Causes
Coff ee is not suitable for automatic
machines.
There is no water.
The brew group is dirty.
This might occur when the machine is
automatically adjusting the dose.
The circuit is not primed.
The coff ee dispensing spout is dirty.
This might occur when the machine is
automatically adjusting the dose.
Coff ee is too coarse.
The coff ee bean hopper selector switch
has been shifted.
The coff ee grind is too fi ne.
The circuits are clogged.
The circuit is not primed.
The brew group is dirty.
The coff ee dispensing spout is clogged. Clean the coff ee dispensing spout and
Some coff ee beans may have got stuck. Move the selector switch back and forth
The blade under the coff ee bean hop-
per has been shifted.
There might still be some coff ee beans
in the coff ee compartment.
The selector switch is not in the correct
position.
The coff ee outlet duct and grinder
have not been emptied.
Solutions
It may be necessary to change the type of
coff ee or the coff ee grinder settings.
Fill the water tank and prime the circuit
(see the "Using the Machine for the First
Time" chapter).
Clean the brew group (see the "Weekly
Cleaning of the Brew Group" chapter).
Brew some cups of coff ee as described in
the "Saeco Adapting System" chapter.
Prime the circuit (see the "Using the
Machine for the First Time" chapter).
Clean the coff ee dispensing spout.
Brew some cups of coff ee as described in
the "Saeco Adapting System" chapter.
Change coff ee blend or adjust grinding as
explained in the "Adjusting the Ceramic
Coff ee Grinder" chapter.
Move the selector switch to the " "
position.
Change coff ee blend or adjust grinding as
explained in the "Adjusting the Ceramic
Coff ee Grinder" chapter.
Perform a descaling cycle.
Prime the circuit (see the "Using the
Machine for the First Time" chapter).
Clean the brew group (see the "Weekly
Cleaning of the Brew Group" chapter).
its holes.
until the coff ee beans are released.
Slide the blade up to the end of the guide
until the hole is covered.
Remove coff ee beans.
Shift the selector switch to the open
"
"
position
.
You need to brew at least two cups of
coff ee before you can taste the new cof-
fee beans.
Advertisement
Table of Contents
