Table of Contents
Advertisement
ENGLISH
48
10
5
Press and hold the "
icon appears on the display. Then release the button. The machine is
now in programming mode.
6
The machine reminds you to insert the carafe and remove the carafe
dispenser by showing the following icons.
7
This icon is displayed during the preheating time required by the
machine.
8
When the desired amount of frothed milk is reached, press the "
button.
Now the "frothed milk" button is programmed. Every time it is pressed, the
machine will brew the same amount of frothed milk that was programmed.
9
Once brewing has been completed, this display is shown to prompt
you to start the quick carafe rinse cycle. You must react within 10 sec-
onds as described in the "Quick carafe rinse cycle" chapter.
" button to select frothed milk until the "MEMO"
"
Advertisement
Table of Contents
