Advertisement
Manual For W-HANDLE Kit
1
Mount the handle to the shaft tube and
clamp it at your best operating position.
CONNECTING THROTTLE WIRE
2
TO THE CARBURETOR
1. Remove the air cleaner cover.
2. Connect the end of the throttle wire to
the joint on the top of the carburetor.
ADJUSTING THROTTLE CABLE
• The normal play is 1 or 2mm when
measured at the carburetor side end.
Readjust with the cable adjuster as
required.
.04 in
(1~2mm)
Cable Adjuster
3
CONNECTING SWITCH WIRES
• Connect the switch wires between the
engine and the main unit. Pair the
wires of the same color
Switch Wires
4
PUTTING ON WAIST PAD
• Wrap the waist pad around the shaft
tube and the throttle wire.
Waist Pad
Band
Advertisement
