Receiver And Remote Control Programming - Chamberlain 1200 Owner's Manual

Receiver and Remote Control Programming

NOTICE: To comply with FCC rules, adjustment or modification
of this receiver and/or transmitter are prohibited, except for
changing the code setting or replacing the transmitter battery.
THERE ARE NO OTHER USER SERVICEABLE PARTS.
Your garage door opener receiver and remote control
transmitter have been set at the factory to a matching
code. The door will open when you press the remote
control push button.
Your "Smart" garage door opener will operate with:
•
up to twelve "Smart" remote control transmitters
(with green indicator lights),
•
a Keyless Entry System, and
•
code switch remote controls with red indicator
lights.
Follow the instructions below to program your opener
to match any additional remotes you may purchase.
See accessories on page 38.
To Add A Remote
1. Press and hold the remote push button. See
Figure 1.
2. Then press and release the "Smart" button on the
back panel of the opener in Figure 2. The opener
lights on the panel will flash once.
3. Release the remote push button.
Now the opener will operate when the remote control
push button is pressed.
If you release the remote control push button
before the opener lights flash, the opener will not
accept the code.
To Erase All Remote Control Codes
• Press and hold the "Smart" button on the opener
panel until the indicator light turns off (about 6
seconds). All the codes the opener has learned
will be erased.
• To reprogram, repeat Steps 1 - 3 for each remote
control in use.
Code programming instructions are also located
on the opener panel.
Children operating or playing with a garage
door opener can injure themselves or others.
The garage door could close and cause
serious injury or death. Do not allow children
to operate the door control(s) or remote
control transmitter(s).
A moving garage door could injure or kill
someone under it. Activate the opener only
when you can see the door clearly, it is free of
obstructions, and is properly adjusted.
Figure 1
Single Function Remote Control
Green Battery
Indicator Light
Figure 2
Garage Door Opener
(With "Smart" Button)
1
"Smart"
Button
33
WARNING
Model 81LM
Push Button
2 3
9 9
1 1
7 3 7 3
5 5
KG KG
Indicator
Light
END PANEL