Range Hood Care; Cleaning - Whirlpool Maytag WVU37UC6FS Installation Instructions And Use & Care Manual

IMPORTANT: Clean the hood and grease filters frequently
according to the following instructions. Replace grease filter
before operating hood.
Exterior Surfaces
IMPORTANT: Do not use soap-filled scouring pads, abrasive
cleaners, cooktop polishing creme, steel wool, gritty washcloths
or paper towels.
To avoid damage to the stainless steel, do not use cleaners that
contain chlorine.
Cleaning Method:
Rub in direction of grain to avoid scratching or damaging the
■
surface.
For stainless steel models, Stainless Steel Cleaner and
■
Polish Part Number 31462A (not included):
See the "Assistance or Service" section to order.
Liquid detergent or all-purpose cleaner:
■
Rinse with clean water and dry with soft, lint-free cloth.
Glass cleaner to remove fingerprints.
■
Metal Grease Filter
For vented installations:
1. Remove each filter by pulling the spring-release handle and
then pulling down the filter.
A
A. Spring-release handle

RANGE HOOD CARE

Cleaning

2. Wash metal filter as needed in dishwasher or hot detergent
3. Reinstall the filter by making sure the spring-release handles
4. Push in spring-release handle.
5. Push up on metal filter and release handle to latch into place.
6. Repeat steps 1-5 for the other filter.
For non-vented (recirculating) installations:
The charcoal filter is not washable. It should last up to 6 months
with normal use. Replace with Charcoal Filter Kit. See the
"Assistance or Service" section for information on ordering.
Replacing an LED Lamp
The LED lights are replaceable by a service technician only.
See the "Warranty" section for service contact information.
solution.
are toward the front. Insert aluminum filter into upper track.
15