Midi Transmit Enable - Yamaha P-200 Owner's Manual

MIDI MAIN VOICE: To set the transpose value for the MIDI main voice, press
and hold [TRANSPOSE], then hold [MIDI], then press a key on the keyboard (or
press the [ –1/NO] or [+1/YES] buttons).
TRANSPOSE
MIDI MAIN
MIDI SUB VOICE: To set the transpose value for the MIDI sub voice, press
and hold [TRANSPOSE], followed by [SPLIT], then [MIDI], then press a key on
the keyboard (or press the [–1/NO] or [+1/YES] buttons).
!
TRANSPOSE
DETUNE
TRANSPOSE
MIDI SUB

MIDI Transmit Enable

You can enable or disable MIDI transmission by pressing the [MIDI] button. The LED
above the [MIDI] button remains lit while this function is enabled.
It will not block the reception of data from the [MIDI IN] jack.
Note that you cannot enable transmission if the [MIDI] button has been turned off.
Also note that setting (in Edit mode) the MIDI transmit channel to Off and setting all
the MIDI Filters to On will have the same effect as disabling the MIDI transmit switch.
The significance in this case is that turning the [MIDI] button off affects all of the
Performances, whereas the aforementioned Edit mode settings can be assigned to
individual Performances.
For details about the P-200's MIDI capabilities, see page 64.
! "
TRANSPOSE MIDI
+
DETUNE
PAGE
+
#
+12
" #
SPLIT
+ +
BALANCE
+
$
+12
MIDI
PAGE
$
MIDI
PAGE
$
40
NOTE
When changing the internal main or
sub voice's transpose value, the MIDI
main or sub voice will change
accordingly.