About Store Type; Voice Parameters - Yamaha P-200 Owner's Manual

ABOUT STORE TYPE

You can choose the Store Type—Non Auto Store and Auto Store.
When Non Auto Store is selected, the store operation is always required (except
when modifying System related parameters; see page 17) if you want to save the
current settings.
When Auto Store is selected, all changes you make will automatically be stored
without the need to perform a specific storing procedure.
The default setting for a new (or initialized) P-200 is Non Auto Store. (For
information about changing the Store Type, see page 52.)
Explanations in this Owner's Manual assume that Auto Store is selected.
Therefore, the LCD illustrations herein may be slightly different than the screens
on your P-200.

Voice Parameters

In Voice Play mode, each of the P-200's AWM instrument voices have a set of Voice
parameters that are initially set at the factory, but which you can change to suit your
needs.
These include controller parameters such as pitch bend range and modulation wheel
assignment, keyboard sensitivity parameters for internal or MIDI applications, and
effect parameters such as reverb type and depth, modulation type and speed, and
internal equalizer settings.
In Voice Play mode you can access a single set of Performance parameters and in
Performance Play mode you can access 24 sets of Performance parameters.
Although you can freely change the voices in Performance Play mode, only a single
set of Voice parameters is available for each Performance.
CONTROLLERS
KEYBOARD SENSITIVITY
EFFECT
VOICE PARAMETERS
• Pitch Bend Range
• Modulation Wheel Assign
• Internal
• MIDI
• Reverb Type, Speed
• Modulation Type, Speed
• Equalizer (Internal) Low, Mid, High
15