Using Mute Groups - Yamaha M3000A Owner's Manual

About the Scene Memory function
Control No. ON/EDIT Switch
60 CH INPUT 56
61 MIX 1 OUT
62 MIX 2 OUT
63 MIX 3 OUT
64 MIX 4 OUT
65 MIX 5 OUT
66 MIX 6 OUT
67 MIX 7 OUT
68 MIX 8 OUT
69 STEREO A OUT
70
71
72
73 MIX 9 OUT
74 MIX 10 OUT
75 MIX 11 OUT
76 MIX 12 OUT
77 MIX 13/14 OUT
78 MIX 15/16 OUT
79
80
81
82
83
84
85
86
87
88
89
• If the CC (control change) parameter of utility
mode is set to "
change numbers (105–112) which correspond to
mute groups will be transmitted or received.
36
Control No. ON/EDIT Switch
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105 MUTE GROUP 1
106 MUTE GROUP 2
107 MUTE GROUP 3
108 MUTE GROUP 4
109 MUTE GROUP 5
110 MUTE GROUP 6
111 MUTE GROUP 7
112 MUTE GROUP 8
113
114
115
116
117
118
119
" (mute group), only control

Using mute groups

When the utility mode oP (recall operation) parame-
ter is set to " " (refer to page 34), the DIRECT
RECALL 1–8 switches will function as "mute group"
switches, and the scenes of memory numbers 1–8 can
be used as mute groups. If two or more DIRECT
RECALL switches are turned on, channels or buses
which are off (muted) in the corresponding scenes
will be turned off (while the ON status stored in these
scenes is ignored).
The following diagram shows the difference in opera-
tion between when the oP parameter is set to "
(direct recall) and "
parameter is set to "
cause the channels or buses to be switched on/off
according to the settings saved in that scene. In con-
trast if this parameter is set to "
DIRECT RECALL 1–8 switches can be turned on, and
all channels or buses which are muted (off) in any of
the mute groups will be muted.
Mute group 1 (scene memory number 1)
CHECK CHECK
ON ON
ON/ ON/
EDIT EDIT
MUTE ON
(OFF)
Mute group 3 (scene memory number 3)
CHECK CHECK
ON ON
ON/ ON/
EDIT EDIT
ON ON
When Direct Recall is used
1
2
The on/off settings of memory number 1
are recalled
3
CHECK CHECK
4
ON ON
ON/
EDIT
5
OFF ON
6
7
8
1
2
Switch to the on/off settings of memory
number 3
3
CHECK CHECK
4
ON ON
ON/
EDIT
5
ON ON
6
7
8
" (Mute group). If the oP
," recalling a new scene will
," two or more
CHECK CHECK CHECK
ON ON ON
ON/ ON/ ON/
EDIT EDIT EDIT
ON MUTE ON
(OFF)
CHECK CHECK CHECK
ON ON ON
ON/ ON/ ON/
EDIT EDIT EDIT
ON MUTE
MUTE
(OFF) (OFF)
CHECK CHECK CHECK
ON ON ON
ON/ ON/ ON/ ON/
EDIT EDIT EDIT EDIT
ON OFF ON
CHECK CHECK CHECK
ON ON ON
ON/ ON/ ON/ ON/
EDIT EDIT EDIT EDIT
ON OFF
OFF
"