Table of Contents
Advertisement
SF61 Cordless Scanner User's Guide
Bluetooth device profile - SPP (*)
3 Pair the scanner with your device:
•
Double-click the Bluetooth icon in the Windows system tray
(or equivalent). The Bluetooth Devices window showing the
current list of paired devices is displayed.
•
Click Add a device or the equivalent command depending on
your operating system.
The host searches for all active Bluetooth devices within range.
Your SF61B scanner appears in the Bluetooth device list with
the name SF61B - BDA, where BDA is the scanner's Bluetooth
Device Address (by default - name can be changed).
Note: If the scanner does not appear in the list, it might already
be paired with the host (under some operating systems,
already-paired Bluetooth devices do not appear in the
Bluetooth device search list).
It may also be switched off and therefore not visible to the host,
press the scan button to restart the scanner.
•
Select your scanner in the list and click Next (or the equivalent
command).
Note: If a pairing code is requested, click Enter the device's
pairing code (or the equivalent command), enter the scanner's
pairing code (the default Intermec Bluetooth pairing code is
"0000") and confirm.
Your SF61B scanner is now displayed in the host PC's list of
paired devices. The scanner is paired but not connected to your
host application - you will not hear the "connection successful"
beep sequence (series of beeps from low to high) or see the blue
Intermec Ready-to-Work indicator (default scanner behavior)
until you connect to your host application.
SPP pairing created two Bluetooth virtual serial ports
(Outgoing and Incoming).
Chapter 2 — Connect the SF61B
35
Advertisement
Table of Contents
