Fuel And Piping - Zenoah G200PU-EI Owner's Manual

FUEL AND PIPING

● For gasoline, please use either regular or high octane, for cars. (The octane number should
be 85 or higher.)
● For oil, use a high-performing mixed lubrication type of 2-cycle engine oil (F3C grade or ISO
EGC grade) and make the fuel volume ratio 1 (oil) to 25-40 (gasoline).
● For fuel piping, refer to the diagram shown below.
• Do not use a silicon tube.
• Clip the weight so that it
does not come off when
the engine is running.
8
(7)
(1)
(4)
(5)
(6)
(3)
1. Fuel tank
2. Carburetor
3. Weight or weight with felt filter
4. Filter
5. Fuel pipe
6. Fuel pipe
7. Air vent pipe
8. Fuel head
(2)
(5)
(8)
Capacity of 300~400cc
Mesh, 300 or more
Gasoline-resistant rubber or vinyl tube
with inner diameter of 2.5~3mm
Gasoline-resistant rubber tube
100mm or less