Other Information - Zenoah G200PU-EI Owner's Manual

CAUTION:
● Remove the sensor.
● Make sure that nut turned with a spanner is nut on the propeller hub side.
● Use a commercial puller of the appropriate size.
● When reassembling the stud bolt, apply LOCK TIGHT to the M6 thread part.

OTHER INFORMATION

This information is to enable our customers to enjoy radio control airplanes more, but all
customers must take responsibility if they implement it.
● With this engine, the muffler side and the carburetor can be reversed by re-assembling the
cylinder and piston.
Standard (A)
● The crankcase is made of magnesium. During processing, allow for sufficient cooling to
avoid the risk of chips burning.
● In the event of even one crash, make sure to contact your service shop or dealer for
inspection and repairs.
16
CAUTION:
● When changing to (B), make sure to
also re-assemble the piston or the
cylinder, piston, etc, will be damaged.
● Please use a new snap ring (1260-
41320) to prevent skipping of the piston
pin.
(B)