Summary Of Features - Gigabyte GA-6EXDR User Manual

6EXDR Motherboard

Summary Of Features

Form Factor
CPU
Chipset
Memory
I/O Controller
Slots
On-Board IDE
On-Board SCSI
On-Board
Peripherals
On-Board VGA
30.4 cm x 24.3 cm ATX size form factor, 6 layers PCB.
250 watt or higher power supply required
Dual ZIF PGA370 Socket
Intel Pentium III FC-PGA
Two onboard VRMs (VRM 8.4 spec V2.5)
100/133 MHz Front Side Bus support
ServerWorks ServerSet
Integrated I/O APIC
Full peer-to-peer support
Four 25° angled 168-pin DIMM sockets
Support only 3.3V PC-100/PC133 registered 72 bit
ECC type SDRAM DIMM.
Maximum up to 4 GB.
NS PC97317VUL Super I/O Chip
Two PCI slots supports 33MHz & PCI 2.2 compliant
Two PCI-64bit/66Mhz slots & PCI 2.2 compliant
PCI Raiser Card (Optional)
Support for UDMA33 IDE and ATAPI compliant
devices.
Supports for dual channel master mode and up to 4
enhance IDE devices.
Integrated LSI SYM53C1010-66 Chipset with
64b/66MHz
Supports dual channel Ultra160 SCSI
160MBps throughput and up to 15 devices per channel
Channel A and B: 68-pin connectors
1 floppy port supports 2 FDD with 360K, 720K, 1.2M,
1.44M and 2.88M bytes
1 parallel ports supports Normal/EPP/ECP mode
2 9-pin UART serial ports (COM 1 & COM 2)
(one serial port via cable- optional)
4 USB ports
Onboard Ati Rage XL PCI Accelerator
Standard 15-pin analog VGA port
8MB SDRAM frame buffer
3
III LE Chipset
TM
To be continued...