Setup & Play - Yamaha W5 Owner's Manual

SETUP & PLAY
After unpacking the W5/W7 and placing it on a keyboard stand or sturdy table or
desk, you ll want to MAKE ALL CONNECTIONS BEFORE PLUGGING IN AND
TURNING ON THE POWER OF ALL DEVICES. This is extremely important in
order to avoid the possibility of causing a power spike that could potentially damage
the W5/W7 or your monitor system, or worse, the possibility of electrical shock.
IMPORTANT NOTE: Danger! Type of electrical cable may be different depending
on countries a third prong may be provided for grounding purposes. Improper
connection of the grounding conductor can create the risk of electrical shock. Do not
modify the plug provided with the W5/W7. If the plug will not fit the outlet, have a
proper outlet installed by a qualified electrician. Do not use an adapter which defeats
the grounding conductor. If you are unsure as to whether the W5/W7 is properly
grounded, check with a qualified service technician or electrician.
CONNECTING TO A MONITOR SYSTEM
The diagram below shows a basic setup using only the W5/W7 monitored by a stereo
system.
W5/7
4 4
Stereo outputs
MIDI
OUTPUT
THRU OUT IN SUSTAIN FOOT FOOT R
CONTROLLER VOLUME
Optional Yamaha FC4
or FC5 foot switch
Monitor System
Stereo Amp
PHONES
L/MONO
Optional Yamaha FC7
or FC9 foot controller
NOTE : Connect only L/Mono if you
have a monophonic sound system