Rear Panel - Yamaha W5 Owner's Manual

REAR PANEL

DIAGRAM & FEATURES
ATTENTION
WARNIING
SHOCK. DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS
SUBJECT TO THE FOLLOWING TWO CONDITIONS:
(1)THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND (2)THIS DEVICE
MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT
MAY CAUSE UNDESIRED OPERATION.
MIDI
THRU OUT
3
POWER SWITCH
Press to turn the power on or off.
POWER CONNECTOR
Attach the power supply cord and plug into the AC power outlet.
MIDI CONNECTORS
For connecting other MIDI devices. The MIDI IN connector receives MIDI data from
an external sequencer or other MIDI device which will control or transmit data to the
W5/W7. The MIDI THRU connector simply passes along the data received at the
MIDI IN connector, allowing convenient chaining of MIDI devices. The MIDI OUT
connector transmits data corresponding to all W5/W7 performance operations, or
bulk data when one of the MIDI data transmission functions are activated.
SUSTAIN JACK
An optional Yamaha FC4 or FC5 foot switch connected here will permit press-on/
release-off sustain control by foot. You can also determine the expression level limit.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
MODEL
: RISQUE DE CHOC ELECTRIQUE NE PAS OUVRIR.
PATENTS
US4738179 US4731835
TO REDUCE THE RISK OF FIRE OR ELECTRIC
US4763553 US4731835
YAMAHA CORPORATION
POWER
MADE IN JAPAN
ON/ OFF
VS25750
1
IN SUSTAIN FOOT FOOT
CONTROLLER VOLUME
4 5 6
SER.NO.
US4584921 US4967635
AC INLET
2
OUTPUT
PHONES
R L/MONO
7
8
1 5