Capital MCR Series Use And Care & Installation Manual page 24

MCR-SERIES
CARE AND MAINTENANCE / LOCATING RATING PLATE
LOCATING RATING PLATE
SERIAL #, MODEL # AND VERIFYING GAS TYPE
The rating plate contains necessary information regarding
your range. It provides the model #, serial # and verifies the
gas type and BTU input ratings for each burner of your
appliance. When calling for service, please have this
information at hand.
The Model #, Serial # and Gas Type information is located
in two places. First, when you open the oven door, you will
find a sticker that shows the model # followed by either an
N (for natural gas) or L (for LP gas), and the serial # (see
picture).
The Rating Plate, showing the Model #, Serial #, Gas Type
and gas BTU input ratings for each burner, as well as
necessary information from ETL test labs, is located
behind the kick-plate. You will need to remove the kick-
plate to access this information (see picture).
24