Cleaning/Replacing The Exhaust Filter; Spare Parts And Accessories - Dirt Devil INFINITY REBEL 54 Operating Manual

3 Maintenance and care

3.2 Cleaning/replacing the exhaust filter

31
CAUTION:
Clean the filter each time you clean the dust filter. Replace the filter if it
is damaged or deformed (see ZChapter 3.4, 'Spare parts and accesso-
ries' for ordering information).
CAUTION:
The exhaust filter cannot be washed.
NOTE:
The exhaust filter cover can be locked more easily if you hold the
release mechanism (fig. 35) and do not release it until the exhaust filter
cover is in its final position.
3.3 Storage
36
WARNING:
Risk of injury! Switch off the appliance after vacuuming ( ) and wind up
the power cord ( ). When winding up the cord, keep the plug in your
hand so that the cord does not thrash about and cannot injure you.
WARNING:
Risk of injury! Always keep the appliance out of the reach of children.

3.4 Spare parts and accessories

You can order accessories and spare parts in various ways:
CAUTION:
Only use original spare parts from the scope of delivery or those which
you have purchased by reordering.
ZPage 46, 'International Service'
14
32 33
37
38
34
1. Switch off the appliance ( ).
2. Pull the plug out of the plug socket.
3. Release the exhaust filter cover as shown (fig. 31).
4. Remove the exhaust filter using the tab provided (fig. 32).
5. Tap out the exhaust filter over a dustbin.
6. Then brush out the exhaust filter with a soft brush, e.g. the furniture
brush included in the scope of delivery (fig. 33).
7. Push the exhaust filter back into its console,
so that the tab audibly clicks into place (fig. 34).
8. Attach the exhaust filter cover at the bottom first.
9. Lock the exhaust filter cover (fig. 35).
click!
39
CAUTION:
Never store the appliance directly next to heat sources (e.g. heater,
oven). Avoid exposure to direct sunlight. Keep the appliance and acces-
sories in a cool, dry place where it does not take up too much space (fig.
36 – 40).
CAUTION:
If you intend to store the appliance for a longer period, empty and clean
the dust container and its filter elements ZChapter 3.1, 'Emptying and
cleaning the dust container'.
The following accessories and spare parts can be reordered:
Item number
5254001 Filter set consisting of:
1 motor protection filter (fig. 24)
1 exhaust filter (fig. 33)
M203-5 1 parquet brush
M219 1 mini-turbo brush "Fellino"
M221 1 midi-turbo brush
M232 1 long, flexible crevice nozzle
M236-1 1 hard floor nozzle
click!
35
40
Content