Advanced Osd Adjustment - Philips 231E1HSB/00 Service Manual

Advanced OSD Adjustment

Advanced OSD Adjustment
1. Front control panel
`
2. To Lock/Unlock OSD function
The OSD function can be locked by pressing MENU button
for more than 6 seconds, the screen shows following windows for
5 seconds.
Every time when you press any button, this message
appears on the screen automatically.
Locked OSD function can be released by pressing MENU
button for more than 6 seconds. While press MENU button
for OSD unlocked purpose, the screen will keep showing OSD
MAIN MENU LOCKED until OSD function unlocked and
screen automatically shows following window for 5 seconds.
3. Access Factory Mode
Press POWER button to Power off, then Press AUTO + MENU
at the same time, and then press [POWER] for DC power on.
OSD menu will be shown with "Factory" on the sub –menu of
Input.. Select "Factory" for entering factory mode.
If this message appeared, means monitor already entered
the factory mode.
(FW)
4. Entering Burn-in mode and others
If you access into factory mode, press MENU,
Select Input-Factory,then press MENU to confirm,
OSD menu willconvert into another format as below:
Move the cursor by MENU button, and press the UP or
DOWN button to change the burn-in mode from On to
Off.
Leave factory mode by simply power off(DC off) the
monitor.
Warming:
* If you only want to enter burn in mode, please don't
change
any other setting items as above listed.
Appendix:
Explanation of above listed selections.
Selection Description
Burn in Enter Aging Mode
On/Off
Auto Color Auto Color Adjustment
Gain ADC Gain Value Adjustment
(Auto adjustment by H/W when
implement Auto Color function)
Offset ADC Offset Value Adjustment
(Auto adjustment by H/W when
implement Auto Color function)
9300K 9300K Color Temperature Gain Value
Adjustment
6500K 6500K Color Temperature Gain Value
Adjustment
Reset Memory Racall To Factory Default
Settings
7
231E LCD