Advanced Osd Adjustment - Philips 220CW8FB/00 Service Manual

Advanced OSD Adjustment

1. Front control panel
2. To Lock/Unlock OSD function
The OSD function can be locked by pressing
for more than 10 seconds, the screen shows following
windows for 3 seconds.
Every time when you press any button, this message
appears on the screen automatically.
ATTENTION
MONITOR CONTROLS LOCKED
Locked OSD function can be released by pressing
button for more than 10 seconds. While press
for OSD unlocked purpose, the screen will keep showing
OSD MAIN MENU LOCKED until OSD function unlocked and
screen automatically shows following window for 3 seconds.
ATTENTION
MONITOR CONTROLS UNLOCKED
3. Access Factory Mode
To hold AUTO and POWER
light flashing at this time. Then release the
Keep pressing the POWER
and LED light give out orange light. Press
OSD menu for confirmation as below:
If this message appeared, means monitor already entered
the factory mode.
Advanced OSD Adjustment
MENU button
MENU
MENU button
buttons, you can saw the LED
AUTO button and
button. The monitor will power on
MENU to bring up
4. Entering Burn-in mode and others
If you access into factory mode, press
FACTORY, then press MENU
convert into another format as below:
Model Name
BIOS Revision
HUDSON 220CW8
NT68670
LPL_LM220WX1
Auto Color
Color Reset
R200
Gain
Offset R125
Power On Timer:
0
Power On Timer Reset
NO
Burn In
Reset
SSC 4
Exit
Move the cursor by MENU button, and press the
DOWN button to change the burn-in mode from
Leave factory mode by simply power off the monitor.
Warning
* If you only want to enter burn in mode, please don't change
any other setting items as above listed.
* Unfortunately, if some settings has been changed by
unknown reasons or wrong operation. Please refer to the
chapter of "W/B Adjustment" to guide the operator how to
restore the default settings or do adjustment.
Appendix:
Explanation of above listed selections.
Selection
Burn in On/Off Enter Aging Mode
Auto Color Auto Color Adjustment
Con Contrast Adjustment
Bri Brightness Adjustment
ADC Gain Value Adjustment
Gain
(Auto adjustment by H/W when implement Auto Color function)
ADC Offset Value Adjustment
Offset
(Auto adjustment by H/W when implement Auto Color function)
sRGB sRGB Color Temperature Gain Value Adjustment
9300K 9300K Color Temperature Gain Value Adjustment
6500K 6500K Color Temperature Gain Value Adjustment
Color Update Save All of Color Temperature Gain Value
Factory Reset Memory Recall to Factory Default Settings
220CW8 LCD
MENU-PICTURE-
to confirm, OSD menu will
BIOS issued date
V0.28 2007-07-16
BZ1A0725123456
B191
G189
G111 B111
3
UP or
YES to NO
Description
7
.