Adjusting Massage Intensity - Panasonic EP1060K Operating Manual

• When the Shoulder Position Indicator is flashing, adjust the position of
the massage heads (upper roller) so that they lightly touch the shoulder.
• The shoulder position can be adjusted up and down 4in. (10cm).
• When it is not possible to correctly adjust the shoulder position, slide
your body down and try adjusting it again.
4. Selecting an Area for Concentrated Massage
• Please see Page 21–23 for details regarding the programs.
Massaging the Neck and Shoulders
• Press this button to focus the program on the neck
and shoulders.
(The upper and lower
back will also be
massaged slightly.)
• Press the button
again to toggle off.
5. Removing Vibration and Tapping from Programs
Removing Vibration from Programmed Operation
• Press this button to remove vibration in programmed
operation. (The vibration will change to a kneading
massage.)
* Press the button
again to restore
vibration to the
program.
• For Tapping B, and Vibration, unless the massage heads are actually touching the body then you may not feel
anything.

6. Adjusting Massage Intensity

• Massage intensity can be adjusted up to 3 levels.
• When the massage heads reach their limit you will hear a "peep,
peep, peep" sound.
7. Auto Stop in Programmed Operation
When the selected program has been completed, the unit will automatically come to a stop.
(Although programmed operation lasts for approximately 15 minutes (12–17 minutes), this will vary according to
the shoulder position and program selected, whether or not tapping is on or off, and the weight of the person
using the unit.)
• The massage heads will move to the retracted position and stop.
• The ON/OFF lamp will flash until the heads have stopped moving.
• If you want to start another massage, please press
• Please rest at least 10 minutes between massages.
8. Stopping Programmed Operation
Press button to stop programmed operation.
• The ON/OFF lamp will continue to flash until the massage heads have returned to the retracted position.
9. Stopping the Massage Immediately
Press button to stop programmed operation immediately.
• All movement will stop immediately.
• The massage heads will not return to the retracted position, which may make sitting in the seat somewhat
uncomfortable.
• Please press button twice in order to return the massage heads to the retracted position.
neck, shoulder lower back
Press
vibration on/off tap on/off
Press
Correct position
• Lightly touching the shoulder.
Massaging the Lower Back
• Press this button to focus the program on the lower
back.
(The neck and
shoulders will also be
massaged slightly.)
• Press the button
again to toggle off.
Removing Tapping from Programmed Operation
• Press this button to remove tapping in
programmed operation. (The tapping will change
to a kneading massage.)
* Press the button
again to restore
tapping to the
program.
Increasing massage intensity
intensity
button.
Too high
Too low
neck, shoulder lower back
Press
vibration on/off tap on/off
Press
Decreasing massage intensity
intensity
Press
Press
15