Table of Contents
Advertisement
3
4,6
5
7
8
For Windows Me
1
Turn on the PC and insert the supplied
USB
CD-ROM into the CD-ROM drive.
2
Turn on the Printer. (l l l l 12)
3
Connect the Printer to the PC using
auxiliary USB cable.
≥The [Add New Hardware Wizard] screen
appears.
≥Depending on your PC, step 4 and 5 may be
skipped. If this is the case, proceed from step 6.
4
Click the [Next] Button.
5
Click the [Finish] Button when the Printer
Driver Software is detected.
≥[Add New Hardware Wizard] screen appears
again.
6
Click the [Next] Button.
7
Select [No] when the [Add Printer
Wizard] screen appears.
≥If a screen to select the default printer is
displayed, select [Yes] if it is to be the default
printer.
≥The item for selecting the default printer may not
be displayed depending on the environment of
the PC.
≥After clicking [Finish], the message [File
*****.DLL is not found] can be displayed
depending on the environment of the PC. Many
PCs may install this file on the Hard Disk. Click
[Refer] and select [C:\windows\option\cabs].
8
Click the [Finish] Button.
≥The driver setup is completed.
≥When the Printer Driver Software is not detected,
please refer to page 34.
≥Please read also the "Notes on the Printer Driver"
(l l l l 41) carefully.
29
Advertisement
Table of Contents
