Auto Preset Memory; Manual Station Preset - Panasonic CQ-C700U Operating Instructions Manual

Up to 6 stations can be preset in AM, FM1, FM2, and FM3
respectively.
Preset stations can be simply called up by pressing [}]
(P-SET) or [{] (P-SET).
Notes:
¡ Direct selection can be executed with [1] to [6] but-
tons on remote control.
¡ You can switch between 6 and 18 for FM presetting
stations. (EACH BAND/ALL BAND)
Preset stations are changeable. (Preset Swap)
¡
Auto Preset Memory (APM)
Stations with good receiving conditions automatically
preset.
1
Select a band.
2
Hold down
[BAND] (APM)
for 2 sec. or
more.
The preset stations under best receiving conditions
are received for 5 sec. each after presetting the sta-
tions (SCAN). To stop scanning, press [}] or [{].
Note: New stations overwrite existing saved stations.
1
Press [MENU] to display the menu dis-
play.
For using the remote
control, hold down
[SEL] (MENU) for 2
sec. or more.
2
Press [PUSH SEL] to adjust.
For using the remote
control, use [BAND]
(SET).

Manual station preset

1
Tune in to a station.
2
Hold down
more.
3
Turn [VOL] to select a preset number.
4
Hold down [PUSH SEL] for 2 sec. or
more, and the frequency is stored at the
selected preset number.
Notes:
¡ In step 2, a station can be registered by holding down
CQ-C700U
the numeric button [1] to [6] for 2 sec. or more.
To stop presetting stations, press
¡
¡ The operation above allows users to replace the cur-
rent station with the station preset in the selected
number while selecting a preset station. (Preset Swap)
3
Press [MENU] to close the menu
screen.
For using the remote control, hold down [SEL]
(MENU) for 2 sec. or more.
PRESET
Preset range for FM bands
or for 2 sec. or
[}] [{]
[DISP] (DISPLAY).
: Individual setting for FM1-3 each
(default)
: Setting of FM1-3 together
CQ-C700U
21