Display Change; Auto Preset Memory (Apm); Manual Station Preset - Panasonic CQ-C1301U Operating Instructions Manual

lights while receiving an FM stereo signal.
Frequency Preset Number
Band
Up to 6 stations can be preset in AM, FM1, FM2, and FM3
respectively.
Preset stations can be simply called up by pressing [1] to [6].

Auto Preset Memory (APM)

With this operation, stations with good receiving conditions can
be automatically stored in the preset memory.
1
Select a band.
2
Hold down [BAND] (APM) for more than 2
seconds.
The preset stations under best receiving conditions are
received for 5 seconds each after presetting the stations
(SCAN). To stop scanning, press one of the buttons from
[1] to [6].
Note: New stations overwrite existing saved stations.

Display change

Press [DISP] to change the display.
Radio mode display (Default)

Manual station preset

1
Tune into a station.
2
Hold down one of the preset buttons from
[1] to [6] for more than 2 seconds.
(blinks once)
Note: New stations overwrite existing saved stations.
Clock display