Smeg Portofino CPF9IPYW Manual page 62

Installing the side plinths
After installing the front plinth, the side plinth
can be fastened correctly to the appliance.
1. Use a screwdriver to remove the front
screws underneath the storage
compartment.
2. Position the side plinth on the lower side
section of the appliance below the
storage compartment.
130
Installation
3. Insert the tabs on the side plinth into the
slots on the rear part of the front plinth.
4. Line up the hole on the side plinth with
the rear hole on the base of the
appliance.