AMX NetLinx NX Series Hardware Reference Manual page 20

NX-3200 Specifications (Cont.)
LAN 10/100 Port:
AxLink Port:
Power Connection:
General Specifications:
Operating
Environment:
Included
Accessories:
Hardware Reference Guide - NX-Series NetLinx Integrated Controllers
RJ-45 connector provides TCP/IP communication. This is an Auto MDI/MDI-X enabled
port, which allows you to use either straight-through or crossover Ethernet cables.
The Ethernet Port LEDs show communication activity, connection status, speeds, and
mode information:
• SPD (speed) - Yellow LED lights On when the connection speed is 100 Mbps and
turns Off when the speed is 10 Mbps.
• L/A (link/activity) - Green LED lights On when the Ethernet cables are connected and
terminated correctly, and blinks when receiving Ethernet data packets.
2 4-pin 3.5 mm mini-Phoenix (male) connectors that provides data and power to
external AxLink control devices. Green AxLink LED indicates the state of the AxLink
port.
2-pin 3.5 mm mini-Phoenix (male) connector with retention screws provides power to
the NX-3200.
• Operating Temperature: 32° F (0° C) to 122° F (50° C)
• Storage Temperature: 14° F (-10° C) to 140° F (60° C)
• Operating Humidity: 5% to 85% RH
• Heat Dissipation (On): 22.5 BTU/hr
• 1 2-pin 3.5 mm mini-Phoenix (female) PWR connector
• 2 4-pin 3.5 mm mini-Phoenix (female) AxLink connector
• 2 6-pin 3.5 mm mini-Phoenix (female) I/O connectors
• 2 8-pin 3.5 mm mini-Phoenix (female) Relay connectors
• 2 10-pin 3.5mm mini-Phoenix (female) RS232/422/485 connectors
• 6 5-pin 3.5mm mini-Phoenix (female) RS232 connectors
• 2 CC-NIRC, IR Emitters (FG10-000-11)
• 2 removable rack ears
Overview
13