Table of Contents
Advertisement
Vitodens 200-W B2HB 19 to 35, 68 to 125 Installation
Connections
(continued)
Field Connection
Connection
X9 Connector
(boiler control board)
Connecting DHW sensor
1. Attach the DHW sensor using the quick connect
plugs from the boiler control board (see page 24).
Install DHW tank temperature sensor
as described in the Vitocell Installation
Instructions supplied with the DHW
storage tank.
Setting altitude parameters
In the factory default setting, the boiler is equipped to
operate in altitudes of up to 5,000 ft. (1,500 m).
Altitude can be set using coding address 93 (in coding
level 2 General).
See Vitodens 200-W B2HB Service Instructions
for applicable system coding information.
Boiler Connections
25
Advertisement
Table of Contents
