Table of Contents
Advertisement
Available languages
Available languages
30" GAS RANGE INSTALLATION INSTRUCTIONS
(For gas venturi models with electric ignition)
Model and Serial Number Location
When ordering parts for or making inquires about your
range, always be sure to include the model and serial
numbers and a lot number or letter from the serial plate on
your range. Your serial plate also tells you the rating of the
burners, the type of fuel and the pressure the range was
adjusted for when it left the factory.
Before You Call for Service
Check to make sure the house fuses or circuit breakers for
your range are not blown or open. Refer to the Avoid
Service Checklist and operating instructions in your
Owner's Guide. It may save you time and expense. The list
includes common occurrences that are not the result of
defective workmanship or materials in this appliance.
Refer to the warranty in your Owner's Guide for our
toll-free service number and address. Please call or
write if you have inquiries about your range product
and/or need to order parts.
Care, Cleaning and Maintenance
Refer to the Owner's Guide for operating and cleaning
instructions.
If removing the range for cleaning or maintenance, shut off
gas supply. Disconnect the gas and electrical supply. If the
gas or electrical supply is inaccessible, lift the appliance
slightly at the front and pull out away from the wall. Pull
only as far as necessary to disconnect the gas and
electrical supply. Finish removing the unit for servicing and
cleaning. Reinstall in reverse order making sure to level the
range and check gas connections for leaks. See Anti-Tip
Instructions for proper anchoring instructions.
8
Advertisement
Table of Contents
