Advertisement
5
Completing the Setup
Parts needed for this procedure:
1
Ignition key
1
Hose coupling (non-CE machines only)
1
Operator's Manual
1
Engine owner's manual (non-Toro engines only)
1
Operator training material
Checking the Tire Pressure
Check the front and rear tires for proper inflation;
refer to Checking the Tire Pressure in the Operator's
Manual for the recommended inflation pressure.
Checking the Side-Discharge
Chute
Remove the packing restraint holding the
side-discharge chute up and lower the chute into
place.
Checking the Engine-Oil Level
Before you start the engine and use the machine,
check the oil level in the engine crankcase; refer to
Checking the Oil Level in the Operator's Manual.
Checking the Air Cleaner
Ensure that the air cleaner is properly installed in the
engine air-cleaner box.
Organizing the Material
Keep all the following items with the machine:
•
Ignition key
•
Hose coupling (non-CE machines only)
•
Operator's Manual
•
Engine owners's manual (non-Toro engines only)
•
View the operator training material before
operating the machine.
4
Advertisement
