Toro TimeCutter HD Series Setup page 2

1
Connecting the Battery
No Parts Required
Procedure
1. Loosen the 2 fasteners on the battery cover
counterclockwise 1/4 turn and remove the
battery cover (Figure
2. Remove the plastic cap from the negative
battery post.
3. Remove the fasteners on the negative battery
cable, and use them to secure the negative
battery cable to the negative battery post
2).
1).
Figure 1
1. Hex bolt
2. Washer
3. Negative battery cable
g190587
(Figure
2
Figure 2
4. Negative battery post cap
5. Nut
6. Negative battery post
g197768