Table of Contents
Advertisement
TROUBLESHOOTING
SECTIONS
Table of Contents
Problem:
I am having difficulty setting up Wired Equivalent Privacy (WEP) security on a Belkin client card (Wireless Network Card or Adapter).
Solution:
The client card must use the same key as the G Wireless Router or
access point. For instance, if your Wireless Router or access point uses
the key 00112233445566778899AABBCC, then the client card must be
set to the exact same key.
1.
Double-click the "Signal Indicator" icon to bring up the "Wireless
Network Utility" screen. The "Advanced" button will allow you to
view and configure more options of your client card.
2.
Once the "Advanced" button is clicked, the Belkin Wireless LAN
Utility will appear. This Utility will allow you to manage all the
advanced features of the Belkin client card.
3.
Under the "Wireless Network Properties" tab, select a
network name from the "Available Networks" list and click the
"Properties" button.
4.
Under "Data Encryption", select "WEP".
G Wireless Router
1
2
3
4
5
6
5.
Ensure the box "The key is provided for me automatically" at the
bottom is unchecked. If you are using this computer to connect to
a corporate network, please consult your network administrator if
this box needs to be checked.
6.
Type your WEP key in the "Network key" box.
Important: A WEP key is a combination of numbers and letters from
A–F and 0–7. For 128-bit WEP, you need to enter 26 keys. This network
key needs to match the key you assign to your G Wireless Router or
access point.
For example: C3030FAF4BB2C3D44BC3D4E7E4 = 128-bit key
7.
Click "OK", and then "Apply" to save the settings.
If you are NOT using a Belkin wireless client card, please consult the
manufacturer's user manual for that wireless client card.
92
7
8
9
10
Advertisement
Table of Contents
