Table of Contents
Advertisement
ALTERNATE SETUP METHOD
SECTIONS
Table of Contents
Setting your Connection Type if you are a Telstra
BigPond/OptusNet Cable User
Follow the on-screen steps and click "Apply Changes" to complete
your setup.
G Wireless Router
1
2
3
®
4
5
6
Setting Custom Domain Name Server (DNS) Settings
A "Domain Name Server" is a server located on the Internet that
translates Universal Resource Locators (URLs) like "www.belkin.com"
into IP addresses. Many Internet Service Providers (ISPs) do not require
you to enter this information into the Router. The "Automatic from ISP"
box should be checked if your ISP did not give you a specific DNS
address. If you are using a static IP connection type, then you may
need to enter a specific DNS address and secondary DNS address for
your connection to work properly. If your connection type is dynamic
or PPPoE, it is likely that you do not have to enter a DNS address.
Leave the "Automatic from ISP" box checked. To enter the DNS
address settings, uncheck the "Automatic from ISP" box and enter your
DNS entries in the spaces provided. Click "Apply Changes" to save
the settings.
38
7
8
9
10
Advertisement
Table of Contents
