Table of Contents
Advertisement
KNOWING YOUR ROUTER
SECTIONS
Table of Contents
7. Power Jack
Connect the included 9V DC power supply to this jack.
8. Connections to Computers (Wired Computer Ports) – Gray
Connect your wired (non-wireless) computers to these ports. These
ports are RJ45, 10/100 auto-negotiation, auto-uplinking ports for
standard UTP category 5 or 6 Ethernet cable. The ports are labeled 1
through 4. These ports correspond to the numbered LEDs on the front
of the Router.
9. Connection to Modem (Modem Port) – Yellow
This port is for connection to your cable or DSL modem. Use the cable
that was provided with the Router to connect the modem to this port.
Use of a cable other than the cable supplied with the Router may not
work properly.
G Wireless Router
1
2
3
4
5
6
10. Reset Button
The "Reset" button is used in rare cases when the Router may function
improperly. Resetting the Router will restore the Router's normal
operation while maintaining the programmed settings. You can also
restore the factory default settings by using the "Reset" button. Use
the restore option in instances where you may have forgotten your
custom password.
a. Resetting the Router
Push and release the "Reset" button. The lights on the Router will
momentarily flash. The reset is complete in 60 seconds.
b. Restoring the Factory Defaults
Press and hold the "Reset" button for at least 10 seconds, then release
it. The lights on the Router will momentarily flash. The restore is
complete in 60 seconds.
10
7
8
9
10
Advertisement
Table of Contents
