Rear View Connections - Sceptre U750CV-UMRD User Manual

Rear View Connections

Line Out / Headphone (3.5mm mini-jack) – This connection is for
1.
connecting to analog audio receivers. You can either use the 3.5mm mini-
jack for connection or purchase a 3.5mm mini-jack to female RCA conversion
cable from any electronic store to connect to your analog audio receiver.
2. SPDIF - This connection port is used for sending out digital audio signals to
digital surround sound receivers. The black (optical SPDIF OUT) connector
sends out either bit-stream or PCM digital sound signal to a home theater
receiver with digital optical input.
3. AV– This connection port is for DVD players or satellite / cable set-top boxes
that use component or composite cables. Connect the yellow plug to the
green port, connect white for left channel audio, and red for right channel
audio. The audio red / white is shared with YPbPr.
4. YPbPr – This connection port is for DVD players or satellite / cable set-top
boxes that use component or composite cables. Connect green, blue, and red
for video, and then connect white for left channel audio, and red for right
channel audio. The audio red / white is shared with AV.
HDMI 3 (ver. 2.0) – HDMI 3 houses a HDMI version 2.0 connection. Under
5.
ultra HD 4K x 2K resolution this connection supports 60 Hz refresh rate and
HDCP 2.2. This HDMI also supports CEC (consumer electronics control)
functions including audio return channel. HDMI connects to devices that use
HDMI cable, such as Blu-ray or HD DVD player, or HD cable / satellite set-top
box. This connection port receives pure digital audio and high definition
signal through one single cable. This port also can accept a HDCP video
device for video.
HDMI 2 (ver.2.0) – HDMI 2 houses a HDMI version 2.0 connection. Under
6.
ultra HD 4K x 2K resolution this connection supports 60 Hz refresh rate and
HDCP 2.2. This HDMI also supports CEC (consumer electronics control)
- 13 -
www.SCEPTRE.com
SCEPTRE UMRD Series User Manual