Table of Contents
Advertisement
Attaching the bell from the tube
TURN TO ATTACH BELL
- Check that the machine is not plugged in.
- Align the flat side of
A
the conical part of the
tube with catch
he inside of the bell.
B
- Insert the conical part
C
into the bell. With the
washer touching the tube seal
the direction of the arrow (see above figure) to
lock the bell lug
and tube lug
E
moderately tightly.
Removing the bell from the tube
TURN TO REMOVE BELL
E
F
8
- Check that the machine is not plugged in.
- Turn the bell in the direction of arrow
figure) to separate the bell lug
lug
. Remove the bell.
F
- If jammed, turn the blades inside the bell in the
direction of arrow
drive shaft.
DRIVE COUPLING
, turn the bell in
D
together
F
Removing the blade
- To remove the blade safely, hold them with the tool
provided or an oven glove or a thick cloth.
1
- Using the removal tool, unscrew the drive
coupling.
- As soon as the drive coupling has been unscrewed,
the blade can be removed for cleaning.
• WHISK FUNCTION (only for CMP Combi)
Attaching the whisk holder to the motor unit.
2
TURN TO
- Check that the machine is not plugged in.
DISENGAGE BLADES
- Align the flat side
the whisk holder with the catch
of the aluminium casing.
(see next
1
from the tube
E
to disengage them from the
2
BLADE LOCKING
BLADES WITH WATERTIGHT SEALS
BELL
BLADE REMOVAL
A
of the conical part
C
B
on the inside
- Insert the whole of the conical part
whisk holder into the aluminium casing.
- Turn the whisk holder in the direction of the arrow
(see figure) until it is locked into place moderately
tightly.
C
B
Removing the casing
- Check that the machine is not plugged in.
- Turn the whisk holder in the opposite direction to
that used when attaching it.
- When it will go no further, remove the whisk
holder from the aluminium casing.
Fitting the whisks into the whisk holder
- Grasp the holder in one hand.
- With the other hand, take the first whisk and insert
the shaft
A
into the bore B of the whisk holder
drive shaft. Make sure the drive lugs
properly aligned with the notches.
- As you push the whisk into the whisk holder drive
shaft
, rotate it slightly in order to slot the drive
C
of
lugs into the notches
D
thereby locking the whisk into place inside the
shaft.
of the
C
A
D
are
of the drive shaft
,
C
Advertisement
Table of Contents
