Robot Coupe 34251A Operating Instructions Manual page 12

At first, try to identify precisely what has caused the
power mixer to stop.
• If it is due to a powercut if the appliance has
been unplugged
- Release the control button (CB).
- Check the power supply.
- Restart the power mixer following the paragraph
entitled OPERATING THE APPLIANCE (page 6).
• If it is due to overheating of the machine
- Release the control button (CB).
- Unplug the power mixer.
- Wait a few minutes for the motor to cool down
and the thermal safety mechanism to be reset.
- Restart the power mixer following the paragraph
entitled OPERATING THE APPLIANCE (page 6).
• If you cannot locate the cause of the problem
- Release the control button (CB).- Unplug the
power mixer.
- Check :
- the plug
- that the blades are free to rotate in the bell,
- the state of the power cord,
- that the drive shaft is free to rotate. To do this,
remove the bell and test the rotation of the end of
the drive shaft manually.
If a malfunction occurs which is not on our list of
possible faults, consult your retailer or return the
appliance to the after-sales service.
12
PROBLEMS
MACHINES IN COMPLIANCE WITH:
• The following European directives and related na-
tional legislation:
- Modified "machinery" directive 98/37/EEC,
- "Low voltage" directive 73/23/EEC,
- "EMC" directive 89/336/EEC,
- "Materials and parts in food contact" directive
89/109/EEC,
- Commission Directive 2002/72/EC of 6 August
2002 relating to plastic materials and articles
intended to come into contact with foodstuffs.
• The following European harmonized standards
and standards setting out health and safety rules:
- EN 292 - 1 and - 2,
- EN 60204 -1 (1998),
- For hand-held blenders and whisk : EN 12853.
(Procedure to follow if the stick blender is acciden-
tally immersed during use)
INDEXES OF PROTECTION:
- IP 55 for the switches.
- IP 34 for the machines.
STANDARDS