Robot Coupe Blixer 2 User Manual
Hide thumbs
Also See for Blixer 2:
- User manual (17 pages) ,
- Safety and operating instructions (2 pages) ,
- Manual (16 pages)
Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Robot Coupe Blixer 2
Summary of Contents for Robot Coupe Blixer 2
- Page 1 • Blixer ® • Blixer Series D ® • Blixer Series A ® • Blixer 4 V. Series A ® Robot-coupe USA. Inc. P.O. Box 16625, Jackson, MS 39236-6625 264 South Perkins St., Ridgeland, MS 39157 e-mail: info@robotcoupeusa.com - website: www.robotcoupeusa.com Phone : 1-800-824-1646...
-
Page 2: Table Of Contents
SUMMARY WARRANTY MAINTENANCE • Blade IMPORTANT WARNING • Motor seal • Bowl locking washer INTRODUCTION TO YOUR NEW • Wiper assembly EMULSIFIER-MIXER Blixer 2 • ® Blixer 3 • Blixer 4 • Blixer 4 V. ® ® ® TECHNICAL SPECIFICATIONS •... - Page 3 Service Agency of the possibility of ched, stained, chipped, pitted, dented or discolo- warranty coverage and provide a Neither ROBOT COUPE U.S.A., INC. nor its red surfaces, blades, knives, attachments or ac- copy of the dated sales or delivery affiliated companies or any of its distributors, di- cessories.
-
Page 4: Important Warning
(see page 6) and make sure that all the attachments Robot Coupe can in no way be held responsible attachments or specific items. are correctly positioned. for the user’s failure to follow the basic rules of •... -
Page 5: Introduction To Your New Emulsifier-Mixer Blixer
INTRODUCTION TO YOUR NEW 3) Place the blade W A R N I N G assembly onto the motor EMULSIFIER-MIXER Blixer ® 2 • shaft. Rotate the blade This appliance must be plugged into an Blixer ® 3 • Blixer ®... -
Page 6: Operation
OPERATION CLEANING • BLADE The blade cap should be removed for cleaning THE UNIT SHOULD BE OFF EXCEPT WHEN W A R N I N G if necessary. Wear cut-resistant gloves when PROCESSING IS UNDERWAY. It is recommended removing the cap. Put a screwdriver or similar tool that the machine be operated on a 50% duty As a precaution, always unplug your appliance into the blade assembly from the bottom, and knock... -
Page 7: Maintenance
• WORKING HEIGHT or power sprayer faucet attachment is effective in Sraper handle knocking the food out of the crevices as a pre-rinse We recommend that you position the Blixer ® on a procedure. The washer should have an industry- stable worktop so that the upper edge of the cutter standard wash, rinse and sanitization cycle. -
Page 8: Service
occurs, allow the machine to cool completely, then reset the breaker located on the motor base. Try to restart. If the machine will not start, remove the bowl, reduce the amount of food being proces- sed, and try again. R E M E M B E R Never try to override or defeat the purpose of, the locking and safety systems. - Page 21 Robot-coupe USA. Inc. P.O. Box 16625, Jackson, MS 39236-6625 264 South Perkins St., Ridgeland, MS 39157 e-mail: info@robotcoupeusa.com website: www.robotcoupeusa.com Phone : 1-800-824-1646...