Page 4
S O M M A I R E WARRANTY CLEANING • Motor unit IMPORTANT WARNING • Foot and bell • Blades INTRODUCTION TO YOUR • Whisk holder NEW POWER MIXER • Whisks SWITCHING ON THE APPLIANCE • Mixing tool housing •...
Page 5
ROBOT-COUPE ., LIMITED WARRANTY Labour to sharpen and/ or replacements SHIPPING DAMAGES. Visible and latent for blades which have become blunt, chipped or defects are the responsibility of the freight Your new ROBOT-COUPE appliance is war- worn after a normal or excessive period of use. carrier.
W A R N I N G IMPORTANT WARNING KEEP THESE INSTRUCTIONS IN A SAFE PLACE WARNING: In order to limit accidents such as electric shocks or personal injury, and in order to limit material damage due to misuse of the appliance, please read these instructions carefully and follow them strictly.
Litres Thanks to an extremely powerful motor, they machine into 350 mm MP 350 Ultra can process quantities of 50 litres to 400 litres mains supply, you • 350 mm MP 350 V.V. Ultra according to the model. Their rapidity and the...
• CONTINUOUS OPERATION • MASHED POTATOES FUNCTION The power mixer can (MP 350 Combi (valid for all models) Ultra, MP 450 Combi Ultra, MP 450 FW Ultra) equally rested against the rim of the Follow steps 1 to 6 above, then: A self-regulating speed system has container, but must be been specially developped for pu-...
• WHISK FUNCTION ASSEMBLING URN TO & DISMANTLING REMOVE BELL You can also hold the appliance by the handle with one hand, leaving • BLADE FUNCTION the other hand free to Attaching the bell to the tube (valid for all models) hold the bowl, if neces- sary.
Page 10
Removing the tube from the motor unit • WHISK FUNCTION - As you push the whisk into the whisk holder drive (MP 350 Combi Ultra, (MP 350 Combi Ultra, MP 450 Combi Ultra, MP 450 Combi Ultra, MP 450 FW Ultra) shaft , rotate it slightly in order to slot the drive MP 800 Turbo)
Page 11
Removing the ejector Detaching the mixing tool from its housing: CATERING AND RESTAURANT WORK - Hold the whisk by the Whisk function wires in one • Mashed potatoes (fresh or instant). Mixing tool hand. housing • Pancake batter • Mayonnaise - With the other hand, •...
HYGIENE • Simple cleaning procedure • MIXING TOOL HOUSING - Place the foot and bell into a suitable container Never immerse the mixing tool housing with water and switch on for a few seconds to The equipment must be clean at all stages of in water or put it in the dishwasher.
• POWER CORD: • FOOT SEAL 2) Cartridge mounting : Direct the ears of For your safety, make sure the power cord is always In order to maintain a perfect watertight seal cartridge in order in good condition. The cord is subjected to conside- between the foot and the bell it is necessary to to be aligned with rable wear and tear, and must be replaced if it is da-...
220 V / 60 Hz 1,500 to 9,000 250 to 1,500 220 V / 60 Hz 1,500 to 9,000 • ELECTRICAL DATA Single-phase machine MP 450 Combi Ultra Single-phase machine MP 350 Ultra Single-phase machine MP 550 Ultra Speed Intensity Speed Intensity Mixer Speed...
Page 15
Single-phase machine it down. If this happens, wait for the appliance • Power cord safety to cool down completely (approx. 30 min.) before MP 450 FW Ultra / MP 450 XL FW Ultra Before you connect the power cord to the mains following the procedure for OPERATING THE supply, always check that this cord: APPLIANCE (page 6).
Page 16
• If it is due to overheating of the machine If a malfunction occurs which is not on our list of possible faults, consult your retailer or return the - Release the control button (CB). appliance to the after-sales service. - Unplug the power mixer.
Page 45
Head Office, French, Robot Coupe Australia Pty Ltd: Robot-Coupe U.K. LTD: Export and Marketing Department: Unit 3/43 Herbert St Fleming Way, Isleworth, 48, rue des Vignerons Artarmon NSW 2064 Australia Middlesex TW7 6EU 94305 Vincennes Cedex- France T (02) 9478 0300 Tel.: 020 8232 1800...