Image Stabilizer Function
Use the Image Stabilizer to reduce the effects of shake during recording.
This unit is equipped with Hybrid Optical Image Stabilizer.
Hybrid Optical Image Stabilizer is a hybrid of Optical and Electrical Image Stabilizer.
Touch
to switch the Image Stabilizer on/off.
O.I.S.
#
/
≥ When [HYBRID O.I.S.] is [ON],
≥ You can also enable or disable this function with the applicable USER button. (
This function is registered to the USER3 button by default.
≥ This item cannot be set during Freeze Frame
∫ Changing Image Stabilizer Mode
Select the menu.
MENU
: [SW SETUP] # [HYBRID O.I.S.] # [ON] or [OFF]
When set to [ON], you can further improve image stabilization for holding the unit and recording a
distant subject with zoom.
≥ Optical Image Stabilizer will be disabled and the setting cannot be changed in the following
cases:
j When Optical Image Stabilizer is set to
j During Freeze Frame
j During Super Slow Recording
≥ Stabilization may not be possible under strong shaking conditions.
≥ When using a tripod, we recommend that you set the Image Stabilizer to
Color Bar Screen
You can display color bars, which are convenient for adjusting the picture quality of a TV.
Touch
.
BARS
≥ To cancel, touch
≥ It will be canceled when the unit is turned off.
≥ While the color bar is displayed, a test tone will be output from the headphone terminal, HDMI
terminal and AUDIO OUT terminal. (the test tone is output at 1 kHz.)
It will not be output from the speaker of this unit.
≥ Different color bars are displayed depending on the [BARS TYPE] setting.
≥ The test tone volume differs depending on the [TEST TONE] setting.
≥ You can record color bars as motion pictures, but not as still pictures.
≥ If you touch
BARS
color bars. To display them again, stop the recording and touch
(OFF)
(l
63)
(l
68)
again.
BARS
while recording color bars as a motion picture, you can stop displaying the
is displayed. When [OFF],
(l
63)
(setting canceled)
- 72 -
is displayed.
l 65
(setting canceled).
(l
114)
(l
121)
.
BARS
)