Table of Contents
Advertisement
Problem
Scenes/still pictures
cannot be played back.
Scenes/still pictures
cannot be deleted.
Problem
Although this unit is
correctly connected to a
TV, images cannot be
seen.
The images are squeezed
horizontally.
Even when this unit is
connected to the TV by the
HDMI cable, images or
sounds are not output.
If the SD card is inserted in
another device, it is not
recognized.
When connected by the
USB Cable, this unit is not
detected by the other
devices.
Playback
≥ Any scenes/still pictures where the thumbnails are displayed
as
cannot be played back.
≥ In most cases,
j Scenes recorded with another device or edited with editing
software
j Scenes with damaged data
≥ The thumbnails of scenes recorded on other devices with
different system frequencies are indicated with
unit cannot play back these scenes.
≥ Release the protect setting.
≥ It may not be possible to delete the following scenes/still
pictures:
j Any scenes/still pictures where the thumbnails are
displayed as
j Any scenes where the thumbnails are indicated with
If the scenes/still pictures are unnecessary, format the SD
card to erase the data.
card is formatted then all the data recorded on the SD card is
erased and cannot be recovered. Back up important data on a
PC etc.
With other products
≥ Please read the operating instructions of your TV and select
the channel that matches the input used for the connection.
≥ Change the setting of the unit depending on the cable
connecting to the TV.
≥ Check if the HDMI cable is connected correctly.
≥ Insert the HDMI cable all the way in.
≥ Check that the device is compatible with the capacity or type
of SD card (SDHC Memory Card/SDXC Memory Card) that
you inserted. Refer to the operating instructions of the device
for details.
≥ When connected to other devices using only the battery,
reconnect using the AC adaptor.
- 142 -
Check points
is displayed for the following scenes:
(l
86)
(l
29) Please be aware that if a SD
Check points
(l
92)
. This
Advertisement
Table of Contents
