Panasonic AG-AC30PJ Operating Instructions Manual page 65

≥ Area Function is not possible in following cases:
j When a setting in [SCENE MODE] is enabled
j During Super Slow Recording
j When a remote control (commercially-available) is connected
≥ Area mode is canceled in following cases:
j If you turn the unit off
j If you press the THUMBNAIL button
j If you switch to Intelligent Auto Mode
j When the setting of [ASPECT CONVERT] is changed
j When [USB MODE SELECT] is set to [DEVICE] and this unit is connected to a PC.
≥ When using Area Mode, even if you set [ZEBRA] to [MARKER], the luminance display frame will
not be displayed.
In addition, the luminance level will not be displayed if [AREA MODE] is set to [FOCUS], [IRIS] or
[FOCUS/IRIS].
Push AF
≥ Register "Push AF" to a USER button.
You can use One Push AF and Push AF.
Capture
≥ Register "Capture" to a USER button.
You can record still pictures or create still pictures from recorded motion pictures.
EVF/LCD detail
≥ Register "EVF/LCD detail" to a USER button.
[EVF/LCD DETAIL] helps you achieve focus easier by emphasizing the outlines of an image
displayed on the LCD monitor or the viewfinder.
≥ These settings will not affect the images actually recorded.
LCD/EVF Output
≥ Register "LCD/EVF Output" to a USER button.
This changes how to turn on/off the LCD monitor and Viewfinder.
(l 68)
(l 73)
(l 104)
(l 33)
(l
(l 57)
(l 38)
(l 57)
(l 57)
(l 37)
(l 57)
- 65 -
(l 89)
110)
(l
(l 21)
(l 95)
31, 82)