Table of Contents
Advertisement
H
After copying has finished, hold the original with one hand, press the
{Clear/Stop} key, and then remove the original.
Note
❒ To cancel copying, press the {Clear/Stop} key. The copier finishes the oper-
ation in progress, and delivers the copy and the original. Press the {Clear/
Stop}key to remove the original.
❒ To call off on-going copying, for example, when you have inserted a wrong
blueprint, press the {Paper Select/Cut} key. The machine interrupts the op-
eration in progress, and delivers the copy and the original. Press the {Clear/
Stop} key to remove the original.
Copying onto Roll Paper
2
25
Advertisement
Table of Contents
