Plugging In The Unit; Monitor Operation - Venturer KLV39120 Owner's Manual

Plugging in the Unit

Plug the AC power cord into the wall outlet
a) Before plugging in the power cord, make sure the voltage of the unit matches your local voltage.
b) Plug the power cord directly into the nearest wall outlet, and wrap the remaining cord around the cord
storage knob at the rear of the unit.
CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT OF
WALL OUTLET, THEN FULLY INSERT.
Follow the illustrations below to open the monitor.
1. Gently pull the monitor down from the back, and twist it clockwise so the screen is visible.
2. The screen can be turned up to 270
does NOT turn completely around.
CONNECTIONS

MONITOR OPERATION

o . Do NOT force the screen once it stops turning. The screen
- 13 -
AC power cord
To AC outlet