Cycle Guide - Maytag MGDB765FC Use & Care Manual

CYCLE GUIDE — SENSOR CYCLES
Senses moisture in the load and shuts off when the load reaches the selected dryness level. The dry temperature shown is the default
temperature. This setting can be modified on some cycles but is not retained for future drying with this cycle. The dryness level shown is the
default dryness setting. This setting can be changed on some cycles and will be retained for future drying with this cycle. Available options
shown in bold are default settings for that cycle.
Use Sensor Cycles for better fabric care and energy savings
To get the most energy savings and enhanced fabric care from your dryer, use the Sensing cycles. These cycles measure the drying air
temperature and moisture levels to turn the dryer off once the load reaches the selected dryness level. For electric models, dryer performance
and results may vary with service voltage less than 240.
Items Cycle:
to dry:
Sheets and Sanitize*
towels
Jackets, Bedding
comforters,
pillows
Heavyweight Heavy Duty
items such as
towels or heavy
work clothes
Jeans and denim Denim
Work clothes, Normal
casual wear,
mixed cottons,
corduroys
Shirts, blouses, Wrinkle
permanent Control
press, synthetics,
lightweight items
Undergarments, Delicates
blouses, lingerie,
performance
wear
* Extended high-heat drying cycle intended to help sanitize items such as sheets and towels. This cycle is not recommended for all fabrics.
For best results, this cycle should be run to completion to ensure sanitization and do not interrupt cycle.
Load Size Recommendations
For best results, follow the wet load size recommendations noted
for each cycle.
Small load: Fill the dryer drum with 3–4 items, not more than
1/4 full.
6
Temperature: Dry Level: Available
Options:
Wrinkle Prevent This is a long cycle with high heat
which has been proven to reduce
household bacteria. This cycle is
not recommended for all fabrics.
Damp Dry Signal Use for drying large, bulky
Wrinkle Prevent items; do not overfill dryer drum.
Partway through the cycle, the
signal will sound for 2 minutes
to indicate when it is time to
rearrange items for optimal
drying.
Damp Dry Signal Offers stepped drying starting
Wrinkle Prevent with High heat followed by
Medium High heat for enhanced
fabric care and energy savings.
Damp Dry Signal Stepped drying uses High heat
Wrinkle Prevent initially, followed by Medium
heat to drive moisture from jeans
and denim.
Damp Dry Signal Starts at High heat, quickly goes
Wrinkle Prevent to Medium High, and then ends
on Medium heat to dry large
loads of mixed fabrics and items.
Damp Dry Signal Uses a stepped drying
Wrinkle Prevent temperature from Medium to Low.
Cycle is designed to help reduce
wrinkles.
Damp Dry Signal Uses a stepped drying
Wrinkle Prevent temperature from Medium to Low
to gently dry delicate items.
Medium load: Fill the dryer drum up to about 1/2 full.
Large load: Fill the dryer drum up to about 3/4 full.
Do not overload. Items need to tumble freely.
Cycle Details: