Ryobi RBV-5200 Owner's Operating Manual page 6

Hide thumbs

Table of Contents

THANK YOU FOR BUYING A RYOBI PRODUCT.

To ensure your safety and satisfaction, carefully read

To ensure your safety and satisfaction, carefully read through

through this OWNER'S MANUAL before using the product.

this OWNER'S MANUAL before using the product.

General Safety Rules

WARNING! Read all instructions and warning labels carefully

WARNING! Read all instructions Failure to follow all instructions

before use. Failure to follow all instructions listed below may

listed below may result in electric shock, ﬁre and/or serious injury.

result in electric shock, ﬁre and/or serious injury. The term

The term "power tool" in all of the warnings listed below refers

"power tool" in all of the warnings listed below refers to your

to your mains-operated (corded) power tool or battery-operated

mains-operated (corded) power tool or battery-operated

(cordless) power tool.

SAVE THESE INSTRUCTIONS

1) Work area

a) Keep work area clean and well lit. Cluttered and dark

a) Keep work area clean and well lit. Cluttered and dark areas

areas invite accidents.

invite accidents.

b) Do not operate power tools in explosive atmospheres,

such as in the presence of ﬂammable liquids, gases

such as in the presence of ﬂammable liquids, gases or

or dust. Power tools create sparks which may ignite the

dust. Power tools create sparks which may ignite the dust or

dust or fumes.

fumes.

c) Keep children and bystanders away while operating a

power tool. Distractions can cause you to lose control.

d) The power of generator will be changed with different

2) Electrical safety

temperatures, altitude and conditions. Only under

a) Power tool plugs must match the outlet. Never modify

rated ambient condition the rated power of generator

the plug in any way. Do not use any adapter plugs with

could be loaded up.

earthed (grounded) power tools. Unmodiﬁed plugs and

2) Electrical safety

matching outlets will reduce risk of electric shock

a) Power tool plugs must match the outlet. Never modify

b) Avoid body contact with earthed or grounded surfaces

the plug in any way. Do not use any adapter plugs

such as pipes, radiators, ranges and refrigerators. There

with earthed (grounded) power tools. Unmodiﬁed plugs

is an increased risk of electric shock if your body is earthed or

and matching outlets will reduce risk of electric shock.

grounded.

b) Avoid body contact with earthed or grounded surfaces

c) Do not expose power tools to rain or wet conditions.

such as pipes, radiators, ranges and refrigerators.

Water entering a power tool will increase the risk of electric

There is an increased risk of electric shock if your body is

shock.

earthed or grounded.

d) Do not abuse the cord. Never use the cord for carrying,

c) Do not expose power tools to rain or wet conditions.

pulling or unplugging the power tool. Keep cord away

from heat, oil, sharp edges or moving parts. Damaged or

Water entering a power tool will increase the risk of

entangled cords increase the risk of electric shock.

electric shock.

e) When operating a power tool outdoors, use an extension

d) Do not abuse the cord. Never use the cord for carrying,

cord suitable for outdoor use. Use of a cord suitable for

pulling or unplugging the power tool. Keep cord away

outdoor use reduces the risk of electric shock.

from heat, oil, sharp edges or moving parts. Damaged

or entangled cords increase the risk of electric shock.

3) Personal safety

e) When operating a power tool outdoors, use an

a) Stay alert, watch what you are doing and use common

extension cord suitable for outdoor use. Use of a cord

sense when operating a power tool. Do not use a power

suitable for outdoor use reduces the risk of electric shock.

tool while you are tired or under the inﬂuence of drugs,

f ) Check electrical equipment (cables, cords and plug

alcohol or medication. A moment of inattention while

connections etc) and make sure they are not defective

operating power tools may result in serious personal injury.

before use. Only tough rubber-sheathed flexible cable

b) Use safety equipment. Always wear eye protection. Safety

can be used.

equipment such as dust mask, non-skid safety shoes, hard

g) Do not connect the generator to other power sources.

hat, or hearing protection used for appropriate conditions will

If the generator need to be connected as a stand-by

reduce personal injuries.

connection in special cases, it only can be operated by a

c) Avoid accidental starting. Ensure the switch is in the

competent person.

off-position before plugging in. Carrying power tools with

h) When replace the circuit breaker the substitute part must

your ﬁnger on the switch or plugging in power tools that have

has identical ratings and performance characteristics.

the switch on invites accidents.

d) Remove any adjusting key or wrench before turning the

3) Personal safety

power tool on. A wrench or a key left attached to a rotating

a) Stay alert, watch what you are doing and use common

part of the power tool may result in personal injury.

sense when operating a power tool. Do not use a

e) Do not overreach. Keep proper footing and balance at all

power tool while you are tired or under the inﬂuence

times. This enables better control of the power tool in

of drugs, alcohol or medication. A moment of

unexpected situations.

inattention while operating power tools may result in

serious personal injury.

f) Dress properly. Do not wear loose clothing or jewellery.

b) Use safety equipment. Always wear eye protection.

Keep your hair, clothing and gloves away from moving

Safety equipment such as dust mask, non-skid safety

parts. Loose clothes, jewellery or long hair can be caught in

shoes, hard hat, or hearing protection used for

moving parts.

appropriate conditions will reduce personal injuries.

g) If devices are provided for the connection of dust

c) Avoid accidental starting. Ensure the switch is in the

extraction and collection facilities, ensure these are

off-position before plugging in. Carrying power tools

connected and properly used. Use of these devices can

with your ﬁnger on the switch or plugging in power tools

reduce dust-related hazards.

that have the switch on invites accidents.

d) Remove any adjusting key or wrench before turning

4) Power tool use and care

the power tool on. A wrench or a key left attached to a

a) Do not force the power tool. Use the correct power tool

rotating part of the power tool may result in personal injury.

for your application. The correct power tool will do the job

e) Do not overreach. Keep proper footing and balance

better and safer at the rate for which it was designed.

at all times. This enables better control of the power tool

b) Do not use the power tool if the switch does not turn it on

in unexpected situations.

and off. Any power tool that cannot be controlled with the

f ) Dress properly. Do not wear loose clothing or jewellery.

switch is dangerous and must be repaired.

Keep your hair, clothing and gloves away from moving

c) Disconnect the plug from the power source before making

parts. Loose clothes, jewellery or long hair can be caught

any adjustments, changing accessories, or storing power

in moving parts.

tools. Such preventive safety measures reduce the risk of

g) If devices are provided for the connection of dust

starting the power tool accidentally.

extraction and collection facilities, ensure these are

d) Store idle power tools out of the reach of children and do

connected and properly used. Use of these devices can

not allow persons unfamiliar with the power tool or these

reduce dust-related hazards.

instructions to operate the power tool. Power tools are

h) Please make sure you have fully understand the

dangerous in the hands of untrained users.

knowlage of functions and positions of the controls

e) Maintain power tools. Check for misalignment or binding

and indicators or meters.

of moving parts, breakage of parts and any other condition

that may affect the power tools operation. If damaged, have

4) Power tool use and care

the power tool repaired before use. Many accidents are

a) Do not force the power tool. Use the correct power

caused by poorly maintained power tools.

tool for your application. The correct power tool will do the

f) Keep cutting tools sharp and clean. Properly maintained

job better and safer at the rate for which it was designed.

cutting tools with sharp cutting edges are less likely to bind and

b) Do not use the power tool if the switch does not turn

are easier to control.

it on and off. Any power tool that cannot be controlled

g) Use the power tool, accessories and tool bits etc., in

with the switch is dangerous and must be repaired.

accordance with these instructions and in the manner

c) Disconnect the plug from the power source before

intended for the particular type of power tool, taking into

making any adjustments, changing accessories, or

account the working conditions and the work to be

storing power tools. Such preventive safety measures

performed. Use of the power tool for operations different from

reduce the risk of starting the power tool accidentally.

intended could result in a hazardous situation.

d) Store idle power tools out of the reach of children and

5) Battery tool use and care

do not allow persons unfamiliar with the power tool

a) Ensure the switch is in the off position before inserting

or these instructions to operate the power tool. Power

battery pack. Inserting the battery pack into power tools that

tools are dangerous in the hands of untrained users.

have the switch on invites accidents.

e) Maintain power tools. Check for misalignment or

b) Recharge only with the charger specified by the

binding of moving parts, breakage of parts and any

manufacturer. A charger that is suitable for one type of

other condition that may affect the power tools

battery pack may create a risk of fire when used with another

operation. If damaged, have the power tool repaired

battery pack.

before use. Many accidents are caused by poorly

maintained power tools.

c) Use power tools only with specifically designated battery

packs. Use of any other battery packs may create a risk of

f) Keep cutting tools sharp and clean. Properly maintained

injury and fire.

cutting tools with sharp cutting edges are less likely to

bind and are easier to control.

d) When battery pack is not in use, keep it away from other

metal objects like paper clips, keys, nails, screws, or

g) Use the power tool, accessories and tool bits etc., in

other metal objects that can make a connection from one

accordance with these instructions and in the manner

terminal to another. Shorting the battery terminals together

intended for the particular type of power tool, taking

may cause burns or a fire.

into account the working conditions and the work to

be performed. Use of the power tool for operations

e) Under abusive conditions, liquid may be ejected from the

different from intended could result in a hazardous situation.

battery; avoid contact. If contact accidentally occurs, flush

with water. If liquid contacts eyes, additionally seek

h) If use manual start please open the oil tap and close

medical help. Liquid ejected from the battery may cause

the valve before use the start system.

irritation or burns.

5) Service

a) Have your power tool serviced by a qualified repair

a) Have your power tool serviced by a qualified repair person

person using only identical replacement parts. This

using only identical replacement parts. This will ensure that

will ensure that the safety of the power tool is maintained.

the safety of the power tool is maintained.

Table of Contents

Ryobi RBV-5200 Owner's Operating Manual page 6

Related Manuals for Ryobi RBV-5200

Related Products for Ryobi RBV-5200

Table of Contents