Using The Directlink Mode; Room Monitor - Uniden 2.4 Owner's Manual

Using the DirectLink Mode

To use this feature, you must enter the two handsets
into the DirectLink mode first.
To enter the DirectLink mode, see page 21.
DirectLink Call
1) When the phone is in the DirectLink standby mode, press
talk/flash (example of DirectLink from handset #1).
2) Select the handset to which you wish to DirectLink with
by pressing the number keys (1-4). Your handset will
then page the other handset.
3) On the receiving handset, press talk/flash, or if Any Key
Answer is on, press any number key,
4) When you finish your conversation, press end on either
handset. Return the handset to the cradle, or press
menu/del, and then select/
standby mode (canceling DirectLink mode).

Room Monitor

This feature allows you to monitor sounds in another room. To use this feature, place the
handset in the desired room to monitor (act an remote mic), and place the other near listner
(remote speaker). For instruction, see "Using the Room Monitor" on page 22.
w w w . u n i d e n . c o m
/tone/←, or #/→.
*
to return to normal
E X P A N D I N G Y O U R P H O N E [ 5 1 ]
note
Two handsets can be
in Direct Link mode
while other handsets
are in use.