Uniden 2.4 Owner's Manual page 29

Voice Mail Tone
1) Enter the Global Setup menu, and then the Voice Mail
Tone submenu (see "Entering the Menu" on page 21).
2) Press ring/vol/∧ or ring/vol/∨ to set the voice message
indication (SDT message signal) to
3) Press select/ . You will hear a confirmation tone.
System Reset
De-register the Handset
1) Enter the System Reset menu, and then the Deregister HS
submenu (see "Entering the Menu" on page 21).
2) Press ring/vol/∧ or ring/vol/∨ to select the handset ID
to be de-registered from the list, and then press
select/ . De re g is t er HS ?
3) Press select/ . You will hear a confirmation tone.
When de-registration is complete,
appears.
C o mp l et e
4) After de-registering the handset, move to "Replacing the
Base Setting" below.
Replacing the Base Setting
1) Enter the System Reset menu, and then the Replacing
Base submenu (see "Entering the Menu" on page 21).
R e pl a ce ba se ? appears.
2) Press select/ . You will hear a confirmation tone.
The base information will be deleted.
When replacing the base is complete,
appears, register the handset to the new base (see page 50).
w w w . u n i d e n . c o m
or .
O n O ff
appears.
D er eg i st r at i on
P l ac e h an d se t o n m a in b a se to re gi s te r
note
Make sure to perform
the Replacing Base
after de-register
the handset.
G E T T I N G S T A R T E D [ 2 7 ]