Installation Of Outdoor Unit - Friedrich MRM36Y3J Installation And Operation Manual

Installation of outdoor unit

(
1. Select installation location
2. the outdoor unit on the selected location with expansion screws
.
Note:
installing the outdoor unit.
Make sure the support can withstand at least
four times of the unit weight.
joint.
, 6 expansion screws are needed; for
the unit with cooling capacity of
, 8 expansion screws are needed
Step two: install drain joint (Only for cooling and heating unit)
1. Connect the outdoor drain joint into the hole on the chassis, as shown in the
picture below.
2. Connect the drain hose into the drain vent.
.
drain vent
chassis
outdoor drain joint
Drain hose
2
)
at least above the floor