Installation Of Outdoor Unit - Friedrich FSHSR09A1A Installation And Operation Manual

Installation of outdoor unit

Step one: Mounting of the outdoor unit
1. Select installation base on building material.
2. Choose the correct mounting hardware for application.
and operable manner.
above the ground for heat pump operation,
this will allow proper water drainage.
anchors for your mounting material.
Step two: install drain joint
1. Connect the outdoor drain joint into
the hole on the chassis, as shown in
the picture below.
2. Connect the drain hose into the drain vent.
drain vent
Drain hose
outdoor drain joint
2
1. Place the outdoor unit on the
2.
chassis
11
at least 2 above the floor
support.
Fix the foot holes of outdoor unit
with bolts.
foot holes
foot holes